Metal roofing
Architectural shingles
Tile roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Fast, Reliable Roof Replacement Across Moreno Valley
Roof replacement in Moreno Valley runs $9,500 to $24,000 for a typical single-family home, with the final number driven by material choice, roof complexity, and whether the job is a tear-off or a lift-and-relay. Most homes here were built in one 1980s – 90s tract wave, which means thousands of roofs are hitting their failure window at the same time. We know what that looks like on a Moreno Valley street because we work them regularly – same stucco ranch, same tile, same underlayment giving out underneath it. Call (866) 412-5697 for a free inspection and a written, line-item estimate before you commit to anything.
Why Baycrest Roofing Is Moreno Valley’s Preferred Roof Replacement Company
Nolan Cafferty built Baycrest Roofing on a simple rule: inspect first, recommend second. That matters more in Moreno Valley than almost anywhere else we work, because the tile on these roofs often looks fine for years after the underlayment beneath it has failed. A contractor who quotes from the ground without pulling tile is guessing. We don’t guess.
Our reputation in Moreno Valley comes from doing the diagnostic work other roofers skip. We measure remaining shingle life, check attic ventilation, and physically lift tile to inspect the underlayment before we ever recommend a price. That’s why homeowners in neighborhoods like Sunnymead Ranch, Hidden Springs, and the 92555 tracts off Moreno Beach Drive call us back for the next roof.
We carry seven manufacturer lines – GAF, CertainTeed, Owens Corning, IKO, Atlas, Tamko, and Boral – so the material conversation starts with what your roof actually needs, not with what we happen to stock. Baycrest is insured and bonded, and every estimate is itemized so you can see exactly where your money goes.
Styles & brands we work with






New Roof Installation in Moreno Valley
New roof installation in Moreno Valley is common on homes built in the late 1980s and early 1990s that are now past their original roofing system’s serviceable life. Most of these are one- or two-story stucco tract homes on wood-frame construction with either concrete tile or composition shingle roofs. A new installation means complete removal of the existing roof down to the decking, an inspection of the sheathing, and installation of a full new system – underlayment, flashing, and the new shingle or tile field.
Tear-Off and Rebuild
On homes east of the 215 where Santa Ana winds off the Badlands regularly stress ridge lines and field tiles, new roof installation often starts with removing a failed tile system outright. The decking gets inspected and replaced where water intrusion has rotted the panels. Then we lay new underlayment, flash valleys and penetrations, and install the new material. Expect $25,000 to $35,000 on a larger two-story when replacing concrete tile with new concrete tile.
Roof Decking Replacement
Moreno Valley roof decking fails where underlayment has been gone long enough for water to reach wood. We replace only the damaged sheets, not the whole roof, then proceed with the new system. Budget $90 to $130 per sheet of plywood or OSB replacement, material and labor included, when it’s called for – and we put that number in writing before we open anything up.
Reroofing in Moreno Valley
Reroofing in Moreno Valley is not the same job as a full tear-off, and that distinction matters more here than anywhere else in the Inland Empire. On most 1980s – 90s tile tract homes, the concrete tile is still structurally sound while the original underlayment underneath is past end-of-life. The answer is usually a lift-and-relay re-roof, not a new tile roof. The tile comes off, the failed underlayment is removed and replaced, and the same tile goes back down.
Lift-and-Relay Tile Re-Roofs
A lift-and-relay re-roof in Moreno Valley typically runs $13,000 to $20,000, depending on roof size and tile condition. Our team has done this on hundreds of tract homes, including a memorable one on a Spanish-tile ranch in the 92553 area. Our crew pulled the original tile and restacked it on the lawn, then found the 1980s underlayment brittle and split along the valleys and penetrations. We replaced the failed underlayment and added ice and water shield at the valleys and flashing points before relaying the same tile. The leaks stopped. The tile, still sound after 35 years, stayed.
Underlayment Replacement Under Existing Tile
The failure point on these roofs is almost never the tile you can see. It’s the felt or synthetic underlayment underneath, which has baked in Moreno Valley’s summer attic heat for three decades and disintegrated. We replace that layer, re-flash everything, and now the tile has a waterproof barrier that will outlast the original. Cost runs $8 to $14 per square foot for the underlayment replacement on a lift-and-relay, including tile removal and re-set.
Trusted Brands We Service in Moreno Valley
We handle Roof Replacement projects with the material that matches your roof and budget, as part of our full-service roofing work across Moreno Valley. Baycrest is authorized to install GAF, CertainTeed, and Tamko products, plus several other manufacturers, so you’re not locked into one brand. On a Moreno Valley tile re-roof, we often recommend Tamko’s synthetic underlayment because it handles the heat better than basic felt. For shingle replacements on tract homes, GAF Timberline lines and CertainTeed Landmark lines both work well in our climate. We keep common flashing components and sealants stocked for faster turnaround. Choose value-tier where value-tier is honest, premium where the exposure demands it. Among our access to leading brands, Baycrest gives homeowners the full range of trusted brands for lasting protection.
See the difference
Before
After
Before
After
Before
AfterCommon Roof Replacement Problems We See in Moreno Valley Homes
- Failed underlayment under sound tile. The 1980s – 90s tile tracts across 92551 – 92557 were built with a base layer of felt or thin synthetic underlayment that is now 30 to 35 years old. The tile still looks fine, but the underlayment is brittle and split, and leaks show up at valleys and penetrations first.
- Santa Ana wind damage on exposed ridge and field tiles. Winds off the Badlands hit Moreno Valley’s eastside tracts hard every fall, cracking tiles and shifting them out of alignment. Wind-driven rain then enters through the gaps during monsoonal storms, causing ceiling stains that appear weeks after the storm.
- UV-degraded composition shingles on early-2000s homes. Shingle roofs in neighborhoods built around 1995 – 2005 are now in their third decade of intense Riverside County sun. Granule loss is visible in gutters and at downspout outlets, and shingles are curling at the edges.
- Dried-out flashing and sealant at penetrations. Vents, skylights, and plumbing pipes all have sealant joints that bake in 110-degree attic heat. Once the sealant fails, water follows the penetration down into the home. We see this consistently on older tracts across 92554 and 92556.
Pricing for Roof Replacement in Moreno Valley, CA
Here’s what roof replacement actually costs in Moreno Valley right now. A full tear-off and new composition shingle roof on a standard single-story tract home runs $9,500 to $14,500. A two-story home with more complexity runs $14,000 to $19,000. Concrete tile replacement with new tile runs $22,000 to $35,000, while a lift-and-relay re-roof that reuses existing tile runs $13,000 to $20,000. Factors that move the number: roof height and pitch, decking damage discovered during tear-off, permits and code upgrades, and the material you choose. We offer free estimates with a written, line-item breakdown so you can compare our bid against any other Moreno Valley roofer apples-to-apples. Call (866) 412-5697 to schedule yours.
We Also Serve Cities Near Moreno Valley
Baycrest Roofing works throughout the Riverside County region, including March Air Force Base, Woodcrest, Colton, and Loma Linda. If you’re just outside Moreno Valley, we can typically schedule the same inspection and estimate process across the wider Inland Empire. Our team knows these neighborhoods and their housing stock as well as we know Moreno Valley.
Serving Moreno Valley, CA — Our Local Coverage Area
We’re based in the Moreno Valley area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Roof Replacement in Moreno Valley
Lift-and-relay is the standard fix because the concrete tile on 1980s – 90s Moreno Valley tract homes is usually still structurally sound while the original underlayment beneath it has failed. Removing and reusing the tile saves material costs and avoids throwing away a tile field that might last another 30 years. The job involves lifting the tile, replacing the underlayment and flashing, and re-setting the original tile. We recommend this when our inspection shows the tile itself is not cracked or spalled. Call (866) 412-5697 to have your roof inspected and see if lift-and-relay is right for your home.
Yes, the City of Moreno Valley requires a building permit for most roof replacements, and that permit can trigger code upgrades depending on what we find once the roof is open. The most common upgrade is attic ventilation, since many 1980s tract homes do not meet current ventilation requirements. We do not hide from that – it’s a line item in the estimate, and we price it up front. We pull the permit, know the city’s inspectors, and make sure the job passes on the first visit. For an exact quote on your permit and scope, call (866) 412-5697.
Compare bids line by line, not bottom line to bottom line. The three big variables are material type, underlayment spec, and whether the quote includes decking replacement, flashing, permit fees, and ventilation upgrades. A lower bid that leaves out decking and code work will change once the roof is open. Ask both contractors to show the line items, and call (866) 412-5697 if you need help understanding what a competing bid actually covers. We’ll walk you through it, no charge and no pressure.
We install products from seven major manufacturers including GAF, CertainTeed, Owens Corning, IKO, Atlas, Tamko, and Boral. On Moreno Valley tile re-roofs, we often use Boral’s underlayment systems or Tamko’s synthetic underlayment because they hold up to our summer heat conditions. For composition shingles, GAF Timberline and CertainTeed Landmark are two lines that perform well in Riverside County sun exposure. We match the material to your roof and your budget, not the other way around. Call (866) 412-5697 to discuss which brand fits your home.
Yes, the combination of 100-plus-degree summer days and Santa Ana wind events off the Badlands drives our recommendations. Composition shingles need granule adhesion and UV resistance that hold up to intense sun, while tile systems need underlayment rated for extreme attic temperatures. On wind-exposed tracts, we recommend additional securing at ridge and field tiles and full re-flashing at valleys and penetrations. For a roof system matched to your home’s specific exposure, call (866) 412-5697 for a free estimate and honest guidance.
Written by Nolan Cafferty, Owner at Baycrest Roofing, serving Moreno Valley, CA.