Metal roofing
Architectural shingles
Tile roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Styles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Metal Roof Installation Cost in Temecula?
Metal roof installation in Temecula typically runs $18,000 to $42,000 for a standard single-family home, with most projects landing between $24,000 and $32,000. That works out to roughly $9 to $18 per square foot installed, depending on the metal type, roof pitch, and how much tear-off and decking repair your roof needs. The wide spread is real: a straightforward standing-seam job on a simple gable roof sits near the bottom, while a complex hip-and-valley roof with stone-coated steel lands near the top.
We inspect first and recommend second, so the number you get from us is tied to your actual roof, not a ballpark scribbled before anyone climbed a ladder. If you want that inspection scheduled before you commit to a dollar figure, call (866) 412-5697. Estimates are free.
Metal Roof Installation Cost Breakdown (2026)
Here’s how the money breaks down across a typical 2,000 to 2,500 square foot Temecula roof. Use these ranges to sanity-check any quote you receive.
| Line Item | 2026 Price Range (Temecula) |
|---|---|
| Metal material (painted steel or aluminum) | $6.00 – $11.00 per sq ft |
| Stone-coated steel panels (premium look) | $9.00 – $15.00 per sq ft |
| Tear-off and disposal of old roof | $1,800 – $4,200 |
| Decking repair or replacement (as needed) | $1,200 – $5,500 |
| Underlayment and moisture barrier | $1,400 – $3,200 |
| Flashing, ridge caps, and trim | $900 – $2,600 |
| Fasteners, clips, and ventilation | $600 – $1,800 |
| Labor and installation | $5.00 – $9.00 per sq ft |
| Permit and inspection fees | $350 – $950 |
What pushes a metal roof install toward the high end? Steep pitches above 8:12 slow the crew down and add safety setup. Multiple roof planes, dormers, and valleys mean more flashing and more cutting. And if your existing roof has multiple layers of old shingles, tear-off and disposal costs climb fast. A simple gable roof with a single layer of old asphalt is the opposite story: less waste, fewer cuts, lower labor.
If you’re still deciding between metal and other options, our guide to roofing services at Baycrest lays out the full picture of what we install and how we approach each material.
How Much Does Each Metal Type Cost in Temecula?
The type of metal is the single biggest lever on your total price. Here’s how they stack up for the Temecula market:
- Painted steel panels: $8 to $13 per sq ft installed. The workhorse option. Good lifespan, solid hail resistance, and plenty of color choices.
- Aluminum panels: $10 to $16 per sq ft installed. Lighter than steel and naturally rust-resistant, which matters in a climate where the inland valleys get summer humidity swings.
- Stone-coated steel: $12 to $18 per sq ft installed. This is where most Temecula homeowners land. It mimics tile or shake without the weight, which holds up well in a city where Mediterranean-style roofs dominate the neighborhoods around Old Town and Paloma del Sol.
- Standing seam aluminum or steel: $14 to $20 per sq ft installed. The premium end. Concealed fasteners, clean lines, and the longest lifespan.
For a deeper read on how each of these performs, see our Metal Roof Installation in Temecula page.
What Affects Metal Roof Installation Pricing in Temecula
- Roof size and complexity. Square footage sets the baseline, but rooflines with many hips, valleys, and wall transitions add labor. A simple rectangle costs less to roof than a sprawling footprint with the same square footage.
- Roof pitch. Temecula’s newer tract homes often have steeper pitches for curb appeal. Above 8:12, crews need extra staging and fall protection, which adds to the labor line.
- Decking condition. In homes built during the early 2000s building boom, we regularly find decking that has taken moisture over the years. If boards are soft or delaminated, they get replaced before the metal goes down. That’s a cost you want, not one you want skipped.
- Tear-off layers. California code limits how many layers of roof covering you can stack. If your home has two old layers, full tear-off is required, and disposal fees in Riverside County add up.
- Access and staging. Homes set back on long driveways or tucked into tight lots in the older parts of town slow down material loading. Lift or crane access for stone-coated panels raises the number.
- Season and demand. Summer in Temecula brings triple-digit heat that affects crew scheduling and panel expansion handling. Booking in spring or fall can sometimes land a better slot and price.
Our crews work across seven manufacturer lines, so we’re not locked into one product’s pricing. We match the material to your roof, not your roof to our inventory. That matters when two metal products do the same job for very different money.
Why Is a Metal Roof More Expensive Up Front Than Shingle?
Metal costs more to install than asphalt shingles, full stop. A shingle roof in Temecula might run $8,000 to $15,000, while metal lands at $18,000 to $42,000. The gap comes down to material cost, longer installation time, and specialized fastening systems. What you’re buying is lifespan: metal generally outlasts asphalt several times over, and it doesn’t lose granules or crack in heat the way shingles do. If you want to compare the two side by side, our metal roof installation overview walks through the trade-offs without the sales spin.
How to Save on Metal Roof Installation
There’s no way around the fact that metal is a premium investment. But there are real ways to trim the number without cutting corners on the parts that keep water out.
- Bundle decking repair into the install. Fixing soft decking during a roof replacement costs far less than discovering the problem later and redoing sections. Line it up in one project.
- Choose a standard color and profile. Custom colors and unusual profiles carry longer lead times and higher material costs. Standard colors on common panel profiles cost less and install faster.
- Remove the old roof. Adding metal over existing shingles saves on tear-off and disposal, but it’s only an option if your deck and code allow it. We’ll tell you honestly whether it’s safe or whether removing the old layer is the right call.
- Schedule in the shoulder season. Spring and fall slots are easier to book and sometimes come with more competitive pricing than peak summer.
- Get a free inspection before you commit. Sometimes a roof doesn’t need a full replacement yet. Our diagnostic-first approach means you understand what’s actually failing before spending on a new roof.
Call (866) 412-5697 for a free estimate and a straight read on whether your roof is a candidate for repair or replacement.
FAQs – Metal Roof Installation Cost
How long does a metal roof last in Temecula?
Metal roofs generally last 40 to 70 years in Temecula’s climate. The inland heat and intense sun are hard on asphalt shingles, but metal handles UV exposure and heat cycling far better, which is why the cost-per-year math often favors it despite the higher up-front price.
Is metal roofing worth the cost in Temecula?
For many Temecula homeowners, yes, over the long run. A $24,000 to $32,000 metal roof that lasts 40 to 70 years often costs less per year than replacing an $8,000 to $15,000 shingle roof every 20 years. It also holds up well against summer heat and occasional monsoon-season storms.
Does a metal roof cost less if I repair my current roof instead?
Repair is usually cheaper than replacement when the damage is localized. A repair might run $600 to $2,500 depending on scope, versus $18,000 to $42,000 for a full metal install. If the roof still has years left, we’ll tell you. If repair is just delaying the inevitable, we’ll tell you that too.
How much does it cost to remove and dispose of an old roof in Temecula?
Tear-off and disposal typically run $1,800 to $4,200 in Temecula. Multiple old layers or a difficult-to-access lot push it toward the top of that range.
Do I need a permit for a metal roof installation in Temecula?
Yes. Roof replacements in Temecula require a permit through the city’s building department, and permit and inspection fees generally run $350 to $950. The exact fee depends on scope and valuation. We handle the permit process as part of the project.
Can I install a metal roof over existing shingles?
Sometimes, and it can save on tear-off costs. But it’s only safe if the deck is sound and code allows it. If your home already has two layers of shingles, California code requires full removal before installing a new roof covering.
How much does standing seam cost versus stone-coated steel in Temecula?
Standing seam typically runs $14 to $20 per sq ft installed, while stone-coated steel runs $12 to $18 per sq ft. Standing seam costs more because of the concealed fastener system and tighter tolerances, but stone-coated steel gives you the tile look many Temecula homes are built around.
Get a Real Number for Your Roof
Pricing guides give you a range. What you actually need is a number tied to your roof, your pitch, and your decking. That’s what our inspection delivers before anyone talks about a dollar amount. We match the material to your roof, from the seven manufacturer lines we install, and we tell you honestly whether repair makes more sense than replacement. Seven brands, one right answer for your home. Call (866) 412-5697 for a free estimate.
Pricing reflects the Temecula market as of 2026. Baycrest Roofing offers free estimates. Call (866) 412-5697.
What Our Customers Say
"Added a ridge vent and cleared the blocked soffit vents. Attic temperature in the summer dropped noticeably and the upstairs is livable now."
— Megan Mercer"Leak over the kitchen turned out to be a cracked boot around a vent pipe, not the roof itself. He showed me the photo from up there and replaced the boot for a couple hundred dollars. The company before him had quoted a full tear off."
— Ebony Nash"Valley had been done without proper underlayment and was leaking. Redone correctly, and he explained exactly what had been wrong so I could understand it."
— Emily Novak