Metal roofing
Architectural shingles
Tile roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
CertainTeed Roofing in Bloomington, CA | Baycrest Roofing
CertainTeed roofing service in Bloomington usually means one of two things: a sun-baked west or south slope that’s failing years before the rest of the roof, or a leak that showed up during the first heavy winter rain. We’re Baycrest Roofing, an independent roofing crew that’s installed and repaired CertainTeed systems across Bloomington’s 92316 zip code for years. The work we do here is shaped by one reality most roofing pages miss: Bloomington’s heat cycles certain slopes to death while others still look new. Call (866) 412-5697 for a free estimate on your CertainTeed repair or replacement.
Why Bloomington Residents Choose Us for CertainTeed Service
Most roofing companies in the Inland Empire know one shingle brand. We work across seven: GAF, CertainTeed, Owens Corning, IKO, Atlas, Tamko, and Boral. That matters in Bloomington because an older tract home here rarely needs a generic answer. Nolan Cafferty, our owner, grew up in Temecula’s Redhawk neighborhood and has spent his adult life on roofs across the Inland Valley, learning what classroom training skips: how Southern California sun, Santa Ana winds, and short brutal rain seasons create failure patterns you don’t see anywhere else. Before we recommend anything, we inspect. Then we tell you what’s actually wrong, whether that’s a repair we can do honestly or a replacement that makes more sense than patching. CertainTeed sales & service is a core part of what we handle, but we’re not manufacturer-authorized. We’re independent, which means our recommendation isn’t tied to moving one product line.
Styles & brands we work with






Common CertainTeed Roofing Problems We Solve in Bloomington
- Curled and lifted Landmark tabs on west and south slopes. CertainTeed Landmark architectural shingles rely on sealant strips that bake out under Bloomington’s 100°F-plus UV exposure. The tabs lift, wind gets underneath, and you’re looking at a slope that’s aged ten years ahead of the shaded side.
- Brittle, cracked XT 25 and XT 30 three-tab shingles. These older three-tab lines were common on 1950s-1970s tract homes. After decades of heat cycling, the exposed granule surface strips away, the asphalt underneath gets brittle, and shingles crack at the edges. We see this constantly on Bloomington’s original roofs.
- Granule loss exposing the mat. On certain sun-exposed CertainTeed slopes, granule loss isn’t cosmetic. Once the mat is exposed, water finds its way through during Bloomington’s winter rain concentration, and the underlayment starts failing underneath.
- Flat-roof tie-in failures. Bloomington’s older homes often mix low-pitch shingle sections with flat-roof areas. The transition is where CertainTeed underlayment and flashing details fail first: heat cycling and Santa Ana winds work sealant and fasteners loose, and the first heavy rain exposes it.
- Step flashing corrosion at walls and penetrations. Where shingle planes meet stucco walls or vent pipes, the original flashing on 50-to-70-year-old homes is often corroded or torn. We rebuild these details with materials that outlast the originals.
CertainTeed Service in Bloomington: What Local Conditions Mean for Your Equipment
Here’s the thing about Bloomington roofs that no generic CertainTeed page tells you: because this is an unincorporated Inland Empire community of mostly older single-story stucco homes, the original shingle roofs are frequently at the end of their life on the hottest south- and west-facing planes first. A roofing inspection here typically finds uneven wear: one slope baked to failure while the shaded north side still looks serviceable. That means a CertainTeed job in Bloomington is frequently a partial-slope replacement, and matching that aged Landmark or XT profile and color on the surviving slopes is the real challenge. We’ve done this enough times off the Bloomington flats — and with CertainTeed repair in Pedley — to know exactly how a 20-year-old Landmark color has faded compared to a new bundle, and how to blend the transition so the repair doesn’t announce itself from the street. The roof either sheds water or it doesn’t, everything else is just conversation. On an older single-story stucco tract home off the flats, our crew found the west-facing Landmark planes baked brittle with lifted tabs while the north slope still held. We stripped and replaced the failed planes with matched CertainTeed architectural shingles, rebuilt the aging step flashing and a vent boot at the low-slope tie-in, and left the serviceable side intact instead of selling a full tear-off. That’s the kind of work Bloomington roofs need.
CertainTeed Models & Products We Service in Bloomington
We work with the CertainTeed lines most common on Bloomington homes: Landmark, Landmark PRO, and Landmark TL architectural shingles; XT 25 and XT 30 three-tab shingles; Presidential Shake and Presidential Shake TL luxury shingles; and Flintlastic SA and WinterGuard underlayment systems. On repairs, we use genuine CertainTeed shingles and accessory components where color and profile are still available, and quality aftermarket underlayment, flashing, and vent boots where they outperform or outlast the original. Since we install and repair these lines regularly across the Inland Empire — including CertainTeed service in Fontana — we keep fast-moving CertainTeed accessories and matchable stock on hand, which shortens turnaround for Bloomington customers. If your roof needs a matched slope replacement, we can usually source the exact profile quickly.
See the difference
Before
After
Before
After
Before
AfterCertainTeed Service Pricing in Bloomington
CertainTeed roof repair in Bloomington typically falls between $350 and $1,200 for most leak repairs, flashing rebuilds, and partial slope replacements. A targeted partial-slope certainteed replacement on the hottest Bloomington planes usually lands between $2,500 and $6,000, depending on square footage, pitch, and how much flashing and underlayment needs rebuilding. A full CertainTeed replacement, which some Bloomington homes need when both hot slopes and the north side are at end of life, generally runs $9,000 to $18,000. What drives the cost here is the uneven wear pattern: repairing one baked slope costs less than a full tear-off, but matching aged shingle color and profile takes more labor than a clean whole-roof install. Our free estimate includes a full inspection, photos of what’s actually failed, and a written line-item quote before any commitment. Call (866) 412-5697 to schedule yours.
Serving Bloomington, CA — Our Local Coverage Area
We’re based in the Bloomington area and know this community well, and we also provide CertainTeed repair in Rialto. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – CertainTeed Roofing in Bloomington
Do I have to re-roof my whole Bloomington house if only the west slope is baked?
No. If the shaded north slope still holds granule and the shingles aren’t brittle, we can often replace just the failed hot plane and rebuild the flashing at the transition. We’ll tell you honestly when a full replacement makes more sense. Call (866) 412-5697 and we’ll inspect it.
Why are my CertainTeed Landmark tabs curling when the north side looks fine?
Bloomington’s west and south slopes take the brunt of 100°F-plus UV exposure, which bakes out the Landmark sealant strips. Once the sealant fails, tabs lift and wind works them loose. The north slope sees far less direct sun, so it ages years behind, hence the uneven wear. That’s the classic Bloomington pattern, and it’s repairable on the affected plane.
Can you match my existing XT 25 or XT 30 three-tab shingles?
Often yes, if the color and profile are still available from CertainTeed. Some discontinued XT colors are harder to source, and we’ll recommend the closest current match plus a blending approach that minimizes the visible transition. If the existing shingles are too far gone, we’ll tell you a replacement is the smarter spend.
My older Bloomington roof has a flat section tied to shingles, how do you handle leaks there?
Flat-roof tie-ins are where Bloomington roofs fail first. Heat cycling and Santa Ana winds loosen the sealant and fasteners at the transition, and water pools before the first heavy rain finds its way in. We rebuild the underlayment, flashing, and vent details at the tie-in using materials that outlast the originals, whether your roof is CertainTeed or another brand, and we offer CertainTeed service in Glen Avon as well.
Does a CertainTeed roof make sense for the 100°F-plus summers here?
CertainTeed’s Landmark architectural lines hold up well under Inland Empire heat when installed correctly, but no shingle escapes Bloomington’s sun on the hot planes. What matters more is the underlayment and flashing details, which fail first. We’ll recommend the right CertainTeed product for your slope orientation and pitch, and tell you the truth about expected life span. Call (866) 412-5697 for an exact assessment, estimates are free.
Service Areas Near Bloomington
Baycrest Roofing serves Bloomington and the surrounding Inland Empire communities. We handle CertainTeed roofing service in Bloomington service area and regularly work nearby in Fontana, Rialto, Colton, and Rancho Cucamonga. We also provide CertainTeed service in San Bernardino and CertainTeed service in Tustin for homeowners across the region.
Book Your CertainTeed Service in Bloomington Today
If you’ve got a baked slope, a leak that showed up after the first rain, or shingles you suspect are done, call (866) 412-5697. We’ll inspect first, tell you what’s actually wrong, and give you a free written estimate. No pressure, just the facts.
Written by Nolan Cafferty, Owner at Baycrest Roofing, serving Bloomington and the Inland Empire.